Operation Manual

220
7 Disposal
7.1 Equipment Disposal
Dispose of this equipment by following the ordinances or regulations of the local authorities
in charge of the disposal site.
7.2 Disposal of Used Batteries
WARNING
Before disposing of used lithium batteries, insulate by affixing tape to the
positive and negative terminals or by other means. Otherwise, short-circuiting
may occur, resulting in heat generation, bursting or ignition.
On this equipment, lithium batteries are used for:
BT1 in the CPU control circuit (CMC-1156) (Sanyo electric CR2032-FT6-1).
Do not keep used lithium batteries but dispose of them immediately after as
non-combustible waste.
Before disposing of used lithium batteries, insulate by affixing tape to the positive and
negative terminals or by other means. In the area where used batteries are separated
from other waste, dispose of them by following the local regulations.
7.3 Disposal of Used Magnetron
The scanner unit in this radar use a magnetron.
After replacing it, return the used one to your local distributor or our sales office.
For detail, ask your local distributor or our sales office.