Installation Instructions

Step #1:
Check and count the items in the box before your
installation. If you are short any pieces, stop and call
the supplier. Otherwise, follow the steps below.
Step #2:
Put the face frame (A) face down on a flat soft
working surface (Figure 1).
Step #3:
Install side panels (Figure 2): insert right and left
side panels (B) into the grooves of face frame (A)
and align the cam lock connectors.
Lock the cam locks with a screwdriver by turning
the screw 180 degrees clockwise (Figure 3).
Figure 1
Figure 2
Figure 3
A
A