Installation Instructions

Step #4:

Install the bottom panel (Figure 4): gently spread

side panels and insert bottom panel (C) into the

grooves of side panels (B) until it touches the face

frame (A).

Step #5:

Install the back panel and toe kick (Figure 5): put

the back panel (D) at rear of side panels (B). Align

it with the top of the side panels and lock each cam

lock. Install the toe kick (E) by locking the cam

locks at both ends.

Step #6:

Install the drawer rail holders (Figure 6): secure

each drawer rail holders (H) with three ½” drawer

rail screws (N) using the predrilled holes on the

back panel (D). Repeat this step for additional

drawers.

Figure 4

Figure 5

Figure 6