Installation Instructions

Step #10:
To install the drawer rails, first separate inner rail
from outer rail by pulling the drawer glide to the
open position. Then push on the black plastic
locking mechanism. Pull the inner and outer rails
apart (Figure 10)
Step #11:
Use two 1/2” round head screws (N) to screw the
inner rail to bottom side of drawer sides (Figure 11).
Step # 12:
Install outer rail to the cabinet frame by pushing the
rails into the drawer rail holder. Use one flat head
screw (L) to fasten the front end of the rail to the
face frame (Figure 12)
Step# 13:
Gently slide the drawer box (with inner rail
attached) into the outer rail. NOTE: Repeat these
steps for additional drawers.
Figure 10
Figure 11
Figure 12