Datasheet

1
Emboss Tape
ZR CONNECTOR
1.5mm pitch/Disconnectable Insulation displacement connectors
圧 接
φ0.7
±0.03
1.5
±0.05
5.52.7
3.5
1.5min
2.2min
7.0
4.6
3.7
2.7
φ0.7
±0.03
1.5
±0.05
1.5min
4.6min
The twin U-slots (IDC slots), the 3-point
insulation grip, and the distortion resistant
disconnectable construction ensure a reliable
connection even during severe environmental
conditions.
• Compact
• Twin U-slot insulation displacement section
• 3-point grip construction
• Distortion resistant construction
• Compatible with the ZH crimp style connector
Specifications –––––––––––––––––––
• Current rating: 0.7A AC, DC (AWG #28)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/30m Ω max.
• Insulation resistance: 500M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: UL1571(Contact JST for details regarding other
UL styles.)
AWG #30, #28
Conductor/7 strands, tin-coated
Insulation O.D./0.7 to 0.8mm
(Contact JST for diameters greater than 0.8mm.)
• Applicable PC board thickness: 0.6 to 1.2mm,1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1
Certified LR20812
Note: 1. Tolerances are non-cumulative: ± 0.05mm for all centers.
2.
Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
3. As for the PC board layout for the SMT type shrouded headers, refer to that of the ZH connector.
Top entry type
Side entry type
Through-hole type PC board layout (viewed from soldering side) and Assembly layout