Datasheet

116
• 3-point grip construction
• Super fine wires are applicable
• Shrouded header
• Twin U-slot insulation displacement section
SUR CONNECTOR
0.8mm pitch/Disconnectable Insulation displacement connectors
Emboss Tape
116
0.5
Header outline
±0.05 ±0.1
±0.1±0.1
0.8
0.7
1. 2
1. 02.3
1. 7
0.35
±0.1
±0.1
±0.1 ±0.1
1.7
0.3
1.1
0.5
1.20.7
±0.05
0.8
Header outline
3.9
1.75
2.25
2.0
3.95
The world's first 0.8mm pitch wire-to-board
insulation displacement connector. Side
entry type is only 3.9mm depth and
1.75mm height after mounting on the PC
board, and top entry type is only 2.2mm
depth and 3.9mm height.
Compared to the conventional 1.0mm pitch
SSR connector, occupation space on the
board is reduced by 34% (side entry type).
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC (AWG #32)
0.2A AC, DC (AWG #36)
• Voltage rating: 30V DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/40m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 200V AC/minute
• Applicable wire: Conductor size/AWG #32, #36
Conductor/7 strands,
tin-coated copper alloy
Insulation O.D./0.39mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1
Certified LR20812
Note: 1. Tolerances are non-cumulative: ± 0.05mm for all centers.
2. Dimensions above should serve as a guideline. Contact JST for details.
Top entry type Side entry type
PC board layout (viewed from component side) and Assembly layout