Datasheet

ManualsBrandsJST ManualsPCB ConnectorsSocket enclosure - cable SJN Total number of pins 8 Contact spacing: 2 mm 1 pc(s)

105

SJN CONNECTOR

2.0mm pitch/Board-in Crimp style connectors

BJST

23456789

U-U

4.9

2.8

1.2min

3.5min

5.45

±0.03

0.9

±0.05

2.0

Side entry type board-in connector, with a

mounting height of only 2.8mm and a

thickness of 4.9mm.

• Housing lances

• Easy mounting onto printed circuit boards

Specifications –––––––––––––––––––

• Current rating: 3A AC, DC (AWG #22)

• Voltage rating: 250V AC, DC

• Temperature range: -25˚C to +85˚C

(including temperature rise in applying

electrical current)

• Insulation resistance: 1,000M Ω min.

• Withstanding voltage: 800V AC/minute

• Applicable wire: AWG #28 to #22

• Applicable PC board thickness: 1.2 to 1.6mm

* Compliant with RoHS.

* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

Standards ––––––––––––––––––––––

0 Recognized E60389

Note: 1. Tolerances are non-cumulative:

0.05mm for all centers.

2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.

PC board layout (viewed from soldering side) and Assembly layout

Summary of content (2 pages)

PAGE 1
SJN CONNECTOR 2.0mm pitch/Board-in Crimp style connectors 2 4 5 6 9 T BJS 1 3 8 U 7 U- Specifications ––––––––––––––––––– Side entry type board-in connector, with a mounting height of only 2.8mm and a thickness of 4.9mm. • Housing lances • Easy mounting onto printed circuit boards • Current rating: 3A AC, DC (AWG #22) • Voltage rating: 250V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Insulation resistance: 1,000M Ω min.
PAGE 2
SJN CONNECTOR Contact Applicable wire mm2 AWG # Model No. 0.95 SJN-001PT-0.9 SJN-002PT-0.9 Insulation O.D.(mm) Q’ty / reel 0.20∼0.33 24∼22 1.1∼1.4 15,000 0.08∼0.22 28∼24 0.9∼1.4 18,000 Material and Finish （5.4） Brass, tin-plated (reflow treatment) RoHS compliance Note: Contact JST if you require shielded wires, thin wires or other special wires. Crimping machine Crimp applicator Contact SJN-001PT-0.9 AP-K2N 0.2 4.0 0.9 0.8 SJN-002PT-0.9 0.