Datasheet

PC board layout (viewed from component side) and Assembly layout
Note: 1. Tolerances are non-cumulative: ± 0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
2
23456789101112
1314
15
SH CONNECTOR
1.0mm pitch/Disconnectable Crimp style connectors
Emboss Tape
2.9
6.3
1.00.6
4.2
1.8
0.2
1.20.7
2.65
Header outline
±0.05
±0.05
±0.1 ±0.1
±0.1
±0.1
±0.1
±0.1
6.25
2.95
1.0
0.6
1.20.7
4.0
1.8
0.2
5.55
Header outline
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
±0.1
±0.1
0.8
0.5
2.0
3.9
1.6
0.8
0.45
1.55
1.35
SSH-003T-P0.2-H 0.032∼0.08 32∼28 0.4∼0.8 23,000
Material and Finish
Model No.
Applicable wire
Q'ty /
reelmm
2
AWG#
Insulation O.D. (mm)
Phosphor bronze, tin-plated (reflow treatment)
Contact
Crimping
machine
AP-K2N
MKS-L-10-3
*MKS-SC
MK/SSH/L-003-02
SC/SSH/L-003-02
Applicator
Crimp applicator Dies
APLMK SSH/L003-02
APLSC SSH/L003-02
Crimp applicator with dies
SSH-003T-P0.2-H
The world's first 1.0mm pitch crimp style
connector.
• Compact, low profile design
• Compatible with the SR insulation
displacement connectors
• Housing lances
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #28)
• Voltage rating: 50V AC, DC
• Temperature range:
-25˚C to
+85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/40m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/AWG #32 to #28
Insulation O.D./0.4 to 0.8mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1
Certified LR20812
Contact
RoHS compliance
Note: Contact JST for gold-plated products.
Note: *Strip-crimp applicator
Contact JST for applicable wires in case that it is not usable due to wire size.
Top entry type Side entry type