Datasheet

ACH CONNECTOR
1.2mm pitch/Disconnectable Crimp style connectors
Emboss Tape
3
3
PUSH
3.75
±0.05
0.8
±0.05
0.8
±0.05
1.2
±0.05
3P : 2.4
±0.05
2P : 1.2
±0.05
Connector
outline
0.85
min
0.6min
0.7min
Connector
outline
3.75
±0.05
1.1
±0.05
0.9
±0.05
0.85min
0.6min
0.8min
Connector
outline
3.75
±0.05
1.1
±0.05
0.8
±0.05
1.2
±0.05
0.85min
0.6min
0.8min
3.6
±0.05
<Single circuit> <2, 3 circuits> <4 circuits>
1.21.45
0.7 0.8
0.6
2.95
Model No.
Applicable wire
mm
2
AWG#
Insulation O.D. (mm) Q'ty / reel
SACH-003G-P0.2
0.05∼0.08 30∼28 30,0000.5∼0.63
Material and Finish
Copper alloy, nickel-undercoated, gold-plated
Contact
Crimping
machine
AP-K2N
MKS-L-10-3
―
MK/SACH-003-02
―
Applicator
Crimp applicator Dies
APLMK SACH003-02
―
Crimp applicator with dies
SACH-003G-P0.2
12
This ACH connector is compact and low
profile type, height: 1.4mm and width
4.3mm,1.2mm pitch wire-to-board
connector.
Specifications –––––––––––––––––––
• Current rating: 2A/1 to 3 circuits AC, DC (AWG #28)
1.5A/4 circuits AC, DC (AWG #28)
• Voltage rating: 50V AC, DC
• Temperature range:
-25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/AWG #30 to #28
Insulation O.D./0.5 to 0.63mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards–––––––––––––––––––––––
0 Recognized E60389
Contact
RoHS compliance
PC board layout (viewed from component side) and Assembly layout
Note: 1. Tolerances are non-cumulative: ± 0.05mm for all centers.
Note: 2. The dimensions above should serve as a guideline. Contact JST for details.
• Top entry but side feed type
• Connector for DC power supply
• Corresponding to sucking nozzle of pick and
place machine
1.4
4.3