Datasheet

935934
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS
series
YC
series
Insertion tool allows contacts be inserted
in the housing.
This tool greatly increases efficiency especially
when thin wires are used.
Extraction tool is used to extract
contacts improperly inserted in the housing.
Note: (1) These tools are for prototype tooling or repair.
(2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies.
Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the
applicable wires described in this catalog may not be crimped properly.
Before use, check for proper crimping (such as tensile strength, terminal/contact deformation).
(3) These tools are not applicable to 2-wire crimping.
(4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of
the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable.
(5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools.
Dimensions:
(W x L) 59X224mm (2.3" x 8.8")
Dimensions:
(W x L) 70X296mm (2.8" x 11.7")
YRM
series
Dimensions:
(W x L) 59X224mm (2.3" x 8.8")
YRF
series
Dimensions:
(W x L) 70X295mm (2.8" x 11.6")
80X305mm (3.1" x 12.0")
YRS series YC series YRM series YRF series
WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
CN-SAP/S1 YRS-870 – – – – – – –
JK-SP2*** YRS-370 – – – – – KEJ-0.7 –
JK-SS2*** YRS-370 – – – – – KEJ-0.4 –
J-SP1*** YRS-440 YC-440 – – – J-BP1*** DEJ-0.3 –
J-SS1*** YRS-440 YC-440 – – – J-BP1*** DEJ-0.3 –
J-SP2*** YRS-330 – – – – – DEJ-0.3 –
J-SS2*** YRS-330 – – – – – DEJ-0.3 –
LFO-1.0-250N –––– JUCS-FO – – –
LFO-2.5-250N –––– JUCS-FO – – –
MD-SP12** YRS-470 – – – – – MEJ-06 –
MD-SP22** YRS-460 – – – – – MEJ-06 –
RA-SC1290
YRS-231
– – – RA-BC12** EJ-RA –
RF-SC22** – – YRM-230 – – RF-BC22** – –
RPJ-SP/SS2331 YRS-331 – – – – – – –
UBB-SP1110 YRS-951 – – – – – – –
UBB-SP2110 YRS-950 – – – – – – –
SAA-21(T)-** – YC-141 – – – LAA-21(T-)** – –
SAA-50(T)-** – YC-182 – – – LAA-50(T)-** – –
SAA-51(T)-** – YC-142 – – – LAA-51(T)-** – –
SAB-51(T)-** – YC-142 – – – LAB-51(T)-** – –
SAGH-002GU-P0.3 YRS-858 – – – – – – –
SAN-002T-0.8A YRS-220 – – – – – EJ-PH –
SAN-002T-0.8K YRS-220 – – – – – EJ-PH –
SBH-001T-P0.5 – YC-670R – – WC-670 BBH-001T-P0.5 – –
SBHL-002T-P0.5 YRS-857 – – – – – – –
SBHM-001T-P0.5 – YC-670R – – – BBHM-001T-P0.5 – –
SBHS-002T-P0.5A YRS-852 – – – – – – –
SBHSM-002T-P0.5 YRS-854 – – – – – – –
YRM-232
(for AWG #26, #24)
YRM-233
(for AWG #24, #22)
Crimping tools
H and tools
Crimping tools
5-A