Datasheet

1
ZE CONNECTOR
1.5mm pitch/Disconnectable Crimp style connectors
Emboss Tape
MIN
0.8
MIN
2.4
±0.05
1.5
±0.1
5.5
±0.1
1.8
±0.1
1.7
±0.1
A
±0.1
3.3
±0.1
0.4
（5.8）
1.2
（9.4）
Connector outline
Circuit No.1
MIN
0.8
MIN
2.9
±0.05
1.5
±0.1
6.6
±0.1
1.8
±0.1
1.7
±0.1
A
3.8
±0.1 ±0.1
1.45
（9.4） 1.2
5.8
Connector outline
Circuit No.1
Note: 1. Tolerances are non-cumulative: ± 0.1mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
＋0.1
0
φ
0.7
＋0.1
0
φ
0.8
±0.05
3.8
±0.05
2
±0.05
1.5
±0.05
1.65
（0.55）
（0.65）
±0.05
A
Connector outline
（10.4）
（5.75）
Circuit No.1
＋0.1
0
φ
0.7
＋0.1
0
φ
1.1
±0.05
1.5
（0.7）
（3.65）
±0.05
A
±0.05
3.7
±0.05
1.85
±0.05
1.55
(9.7)
(6.3)
Connector outline
Circuit No.1
<SMT type>
Note: 1. Tolerances are non-cumulative: ± 0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method.The dimensions above should serve as a guideline. Contact JST for details.
• Secure locking structure
• Contact locking structure
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range:
-25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/40m Ω max.
• Insulation resistance: 500M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/AWG #30 to #24
Insulation O.D./0.8 to 1.2mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
PC board layout (viewed from component side) and Assembly layout
Top entry type Side entry type
Top entry type Side entry type
1.5mm pitch secure lock type connector.
Fork-shaped header contact provides the
good mating feeling and secure mating
operation.