Navigator" II User's Manual Model No.: CCD-401 Miniature Wireless Color Camera System - Wireless Color Westherproof IP44 Camera with Audio PLEASE READ CAREFULLYAND SAVE This manual contains important information about this product's operation. If you are installing this product for use by others you must leave this manual -or a copy- with the end user.
Model No.: CCD-4Q1 Miniature Wireless Color Camera System Important! Contents Please read this booklet carefully before installing or using these units. DANGER-HIGHVOLTAGE-These units should ONLY be opened by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, endusers and service technicians should follow all safety procedures outlined in this manual.
Important Safety Precautions FCC/CE WARNING Please read before In$talling yourpurd1~se of th~ Miniature Wireless ColorCamera before Installin9and this camera,monitorand cordout of reach c -Do not p'lac~the camera,mollltor adaptercordin a alb or Please read Ihese IIinstructions - Do 110tuse the camera near wat~r or damp and wet environments, s or wef basements, locate - locate camera, monitor and ACJDC adapt~r where th~re is ad~quat~ ventUation, Do the camera in direct sunlight Do nollocate the monito
Pans Included with This System Installation - Camera with Built-In Transmitter - 2.4 GI-btAudioNldeo Receiver Tools you will need: Pencil, Drill, Drill Bits, Phillips.head Screwdriver. Hammer - 12V ACJDC Adapter for the Receiver - 1.5V300 RIA Adapter for the Camera - 1,5mAN { ~ble "" Installing Mounting Bracket (Camera Stand) 1. Select a mounting location. Use the mounting bracket as a guide and mark the screw Parts of the Miniature Wireless Color Camera System Parts of the Camera 1.
Installing the Miniature Wireless Color Camera System Troubleshooting To installthe If the Camera and/or Manitor... system, follow these steps: Receiver: 1. Plug the AC/DC adapter cord into the DC input jack on the back ofthe receiver. 2. Plug the audlolvldeo cord to the anulo!v1deo output jack of the receiver. Plug the other end of the to the audiolv1deo input jacks on your TV or monitor. 3. Plugthe nv ACIDC adapter Inlo a (110V-.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.