User's Manual

ManualsBrandsJSW Pacific ManualsCamera & Photo2.4 GHz Wireless Mini Camera

PLEASE READ CAREFULLY AND SAVE

This manual contains important information about this product's operation.

If you are installing this product for others, you must leave this

manual -or a copy- with the end user.

User's Manual

Model No.: CCD-414 (A)

- Wireless Heavy Duty A/V Receiver

2.4 GHz WIRELESS SUPER

MINI COLOR CAMERA KIT

- Wireless Mini Color Camera

(50M)

Summary of content (6 pages)

PAGE 1
User's Manual Model No.: CCD-414 (A) 2.4 GHz WIRELESS SUPER MINI COLOR CAMERA KIT - Wireless Heavy Duty A/V Receiver - Wireless Mini Color Camera PLEASE READ CAREFULLY AND SAVE This manual contains important information about this product's operation. If you are installing this product for others, you must leave this manual -or a copy- with the end user.
PAGE 2
Important! Please read this manual carefully before installing or using these units. WARNING- These units should ONLY be disassembled by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, endusers and service technicians should follow all safety procedures outlined in this manual. Specific Warning and Caution statements (and/or symbols) are marked on the units which needed.
PAGE 3
Disposal If the camera system no longer functions respectively can no longer be repaired, it must be disposed of according to the valid statutory regulations. Disposal of spent batteries / accumulators You are required by law (Battery Ordinance)to return all spent batteries and accumulators. Disposing of spent batteries/accumulators in the household waste is prohibited! Batteries / accumulators that contain hazardous substances are marked with the symbols on the side.
PAGE 4
The following symbols need to be observed: = An exclamation mark in a triangle indicates important notices in these operating instructions that must be observed under all circumstances. = A lightening symbol warns of electric shock or the impairment of the appliance's electric safety. • You may only use a (100V~240 Volt / 50 Hz or 60 Hz), socket of the public supply net for the supply of the power packs. Never attempt to operate the appliances with a different voltage.
PAGE 5
System Installation When installing the camera, check the reception of the receiver before final installation. Have someone hold the camera in the area to be monitored. Have another person move the receiver to a variety of locations throughout the house to check reception. If interference or other problems occur, refer to the Troubleshooting Guide. To install the system, follow these steps: - Select the channel (Channel 1-4, as indicated on Channel Label) to be used on both the camera and receiver.
PAGE 6
Installing the Camera ATTENTION! Prior to drilling and inserting the screws, make sure that there are no electric cables pipes, etc. in the wall that may become damaged. Connecting the camera Connect the 7.5V DC plug of the power unit to the voltage supply jack of the camera. Pay attention to the correct input voltage of 7.5V DC! • Insert the plug-in power unit into a suitable mains socket. • The camera is now ready for use. Installing the Receiver Set up the receiver approx.