User's Manual

ManualsBrandsJSW Pacific ManualsCamera & PhotoWireless Dual-Mode Color Camera Kit

- - -

-------- -[ I

Navigator"

User's Manual

Model No.: SAV-2450

Walkie- Watchie

Wireless Dual-Mode Color Camera Kit

- 2.4GHz Wireless Receiver with Rod Antenna

- Wireless PIT Color Camera

"""'u

aaa~

~ --- .

a.O 0

. 0°

O~ooo

PLEASE READ CAREFULLYAND SAVE

This manual contains important information about this product's operation.

If you are installing this product for use by others you must leave this

manual -or a copy- with the end user.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

of the following measures:

. Reorient or relocate the receiving antenna.

. Increase the separation between the equipment and receiver.

. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

. Consult the dealer or an experienced radio/TV technician for help.

FCC Caution :To assure continued compliance, any changes or modifications not expressly approved

by the party responsible for compliance could void the user's authority to operate this equipment.

(Example - use only shielded interface cables when connecting to computer or peripheral devices).

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Summary of content (5 pages)

PAGE 1
- - - - -------- -[ I Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
-= - - - Model No.: SAV-2450 , Walkie-Watchie Wireless Dual-Mode Color Camera Kit Important! Contents Please read this booklet carefully before installing or using these units. DANGER- HIGH VOLTAGE- These units should ONLY be opened by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, endusers and service technicians should follow all safety procedures outlineq in this manual.
PAGE 3
Important Safety Precautions FCC/CE Please read before Installing Congratulations on your purchase of the Walkie-watchie Wireless Dual-Mode Color Camera Kit. Please read these safety and operating instructions carefully before installing and using this system. - Keep the camera, monitor and ACIDC adapter cord out of reach of children. - Do not place the camera, monitor or ACIDC adapter cord in a crib or playpen.
PAGE 4
J c::I Parts of the Camera Parts Included with This System - PIT Camera with Built-In Transmitter - 2.4 GHz AudioNideo Receiver - 7.5V 500mA Adapter for the Receiver - 7.
PAGE 5
Troubleshooting Guide Installing Wireless Dual-Mode Color Camera Kit If the Camera and/or Receiver... To install the system, follow these steps: Receiver: 1. Plug the AC/DC adapter cord into the DC input jack on the back of the receiver. 2. Plug the audio/video cord to the anuio/video output jack of the receiver. Plug the other end of the cord to the audiolvideo input jacks on your 1V or monitor. 3. Plug the 7.5V ACIDC adapter into a standard (11 OV-240V) outlet.