or to not have a bright LCD when sleeping. If Power Saving mode is on, motion detection events will turn the LCD screen back on. 1. From the System Setup screen, use VOL+ and VOL- to select Power Saving; press M. The Power Saving screen displays. 2. Use CH+ and CH- to choose between 5 min, or 10 min; the third option is Always On, which keeps the system from entering Power Saving mode. Press M to accept the setting and return to the Power Saving screen.
. Use CH+ and CH- to choose between Quad and 5, 10, and 15 second intervals. Press M to accept the change and return to the Multi Channel Display screen. • The Activate or Deactivate setting (Camera Setup screen) affects which cameras display in Scan mode. • Audio is available from camera 1 in Quad mode, from whatever camera is a previously viewed channel, or from a channel triggered by motion detection. Default The Default screen gives you the options of selecting a default language.
2. Use CH+ and CH- to choose between English, French (Français), or Spanish (Espanol). Press M to confirm and back out. The DEFAULT screen will also alert you when it detects a new firmware upgrade on the SD card. Go to page 52 for details. Alarm Buzzer You can set the alarm buzzer to go off when a camera detects motion and begins recording. 1. From the main menu, use CH+, CH-, VOL+, and VOL- to select Alarm Buzzer. 2. Press M to toggle the setting between ON and OFF.
1. From the main menu, use CH+, CH-, VOL+, and VOL- to select Pan Tilt Zoom and press M. The first camera displays in single camera mode. 2. Press ZOOM. The camera zooms into Level 1. Press Zoom again to zoom into Level 2. (Sample actually goes into QUAD mode, then press ZOOM and into camera 1.) 3. Press CH+ and CH- to pan the camera from left to right and back or VOL+ and VOL- to tilt the camera up and down. 4. Press ESC to return to the the main menu.
Scan Activated Cameras 1. From the the main menu, press CH+, CH-, VOL+, and VOL- to select Scan Activated Cameras and press M to enter Scanning mode. 2. The screen scans between the cameras according to the scan time set up in the Multi Channels Idle Display screen (refer to page 31). If a recording session started during SCAN mode (Schedule or Motion recording), the system resumes display in quad mode.
2. Press M again to toggle the overwrite setting between ON and OFF. Press M. The system overwrites the oldest files first. The system displays the following SD card detail information. • SD card available storage space • If no space is available, 0.00GB displays. • Error indicator displays if: —— SD card not present —— SD card is locked. —— SD card is unformatted —— SD card is damaged. Please use well-known brands of micro SD cards to avoid operation errors.
SPECIAL FEATURES This section provides Remote Access requirements and software installation, setup, and usage procedures for accessing your live feeds from a number of wired and wireless devices.
•• iPhone® or •• iPad® or •• AndroidTM smartphone or tablet Install Uniden Remote Service Software 1. Insert the UDS655 Remote Software CD in your PC's CD ROM. 2. Select Uniden Remote Service and double-click to install. 3. The Welcome window appears. Click Next to select an installation folder. 4. The default folder is located at C:\ Program Files\. If you want to store it in a different installation location, click Browse. When you have selected an installation location, click Next to proceed.
If the computer has more than one user account that needs to access the video feed, select Everyone; otherwise, select Just me. 5. The Confirm Installation screen displays. Click Next to begin installing the software. A progress bar displays.
6. The Installation Complete screen displays when the software is installed. Click Close to leave the Installation wizard. 7. Turn on the UDS655 monitor and connect it to the PC using the USB cable. 8. A New Hardware Found indicator appears on the lower right-hand side of the PC screen. 9. Click Start to activate OMGuard Remote Service. The OMGuard Setup screen displays.
10. Select or enter the following: • Display language (Default = English). • USB 2.0 Camera (from USB Video Device dropdown list) • DID Code (located on the back of the monitor) • Security Code (The default security code is 12345.) You can set up a different security code at this time, but be sure and use that code when you're using the app and setting up a Portal account. You can enter up to 8 numeric digits. 11. Click Connect to Internet.
The Account Setup screen displays 4. Enter Account Name (1). 5. Enter a Password (2). 6. Enter it again to Verify Password (3). 7. Complete all required fields (4). 8. Click in the check box (5) to receive information on firmware updates and news. We recommend you check this box to receive updates. 9. Click in the check box (6) to receive information on special offers from Uniden. 10. Click Submit (7). The New Account Created screen displays. 11. Click Continue. The Video System Registration screen appears.
Select Your Model/Enter the DID Code 1. The Video System Registration screen displays. Select UDS655. 2. Click the radio button by your system (3). 3. Enter the DID code in all capital letters (4). 4. Click Continue (5). 4 3 5 5. A Confirmation screen displays; select View Now. 6. The View Now screen displays. At the bottom of the screen is a prompt to install the OCX plugin. Install it on whatever PC you want to remotely view your video. 7.
Using Remote Access If you want to view your video remotely, you must do the following: 1. Verify that your PC is connected to the internet and that Uniden Remote Service software is installed. 2. Use the USB cable to connect the monitor and the PC. 3. Launch the Uniden Remote Service software. 4. Enter the security code. 5. Select Connect to Internet.
Take A Snapshot Through the Portal The Portal lets you take snapshots of video and save to your PC. Click Snapshot. You specify the save location for all video and snapshots. Select Save and then browse to the location where you want to save them. Play Back Recorded Files on Your PC The files that record on the UDS655 record onto the microSD card. You can take that card and play it on your PC.
2. Use the AV cable (provided) to connect the television to your monitor. 3. The monitor screen goes blank and video displays on your television.
Downloading and Using the Apps AndroidTM Download You can use a Google® AndroidTM smart phone or tablet with your Uniden Guardian 2 System to remotely connect to and view live camera video. Follow these steps to download, add, and use the app. 1. From your AndroidTM smart phone or tablet device search the Android Market for Uniden Guardian 2. 2. Download the Uniden Guardian 2 app. This app has a black and gold icon. 3. Launch the app; select Add to add your system information to the app. 4.
The Uniden Guardian 2 app has a Search feature which will automatically find your UDS655 system on your "intranet." If the phone is connected via WiFi to the same router/ network that the PC is on, selecting the Search button in the app will automatically find your system and enter the DID code in the DID Code field. You will only have to enter the Security Code you entered in the Remote Access software.
4. Tap Return to stop the video and enter the system page. You can take snapshots from the video by using the Snapshot and Return icons. Snapshot icon. Tap to take a picture. Return icon. Tap to return to the Main screen iPhone® In a similar fashion to the Android smart phone, you can use the Apple® iPhone® smart phone or iPad® tablet with your Uniden Guardian System to remotely connect to and view camera videos.
The Uniden Guardian 2 app has a Search feature which will automatically find your UDS655 system on your "intranet." If the phone is connected via WiFi to the same router/network that the PC is on, selecting the Search button in the app will automatically find your system and enter the DID code in the DID Code field. You will only have to enter the Security Code you entered in the Remote Access software. App Operation When you open the app on your iPhone or iPad, several icons display on the bottom task bar.
Snapshot icon. Tap to take a picture. Return icon. Tap to return to the Main screen.
Maintaining Your System Upgrading your Uniden UDS655 Firmware Check your system firmware version by selecting your language again on the DEFAULT screen. Both the cameras and monitor firmware display. Go to www.unidenvideo.com to check the current firmware level. Compare it to your system firmware level. If you need to update your UDS655 firmware, download the most current firmware version to your system’s microSD card and then upload that firmware to the monitor. 1.
Solving Problems If you have any trouble with your system, try these simple steps. If you are still having a problem with your camera, check the manual that came with your camera. If… Try.. Motion detection won’t respond to movement. • Increasing the motion sensitivity (see page 24). • Checking the settings on the Record Schedule screen (see page 22). Motion detection goes off when there’s nothing there. • Decreasing motion sensitivity (see page 24).
If… Try.. When I power up my monitor and cameras for the first time, they seem to be on but there is no picture on the screen If the Power Saving feature has been turned on, the monitor’s LCD screen will power off. Tap the power button to turn the LCD back on. There is no video (or audio) when I try to watch live video on the television. • Making sure the UDS655 is turned on. • Making sure the AV plugs are inserted into the correct jacks on the television. • Making sure they are fully seated.
Specifications Camera Maximum Channels Communication Range Monitor Resolution Camera Resolution Operating Temperature Operating voltage Current consumption Night Vision Dimension Monitor 4 500 ft in open space 800 x 480 640 x 480 -10°C ~ +50°C DC 5V / 1A 550mA (max) 860mA (max) 40 ft 123L x 65H x 65W mm 200L x 122H x 25W mm MicroSD Card Capacity (1GB = 10 hours) Recycling and Disposal Information ►► Do not dispose of electronic devices or any of their components (especially batteries and LCD displays)
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
One-year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date of original retail sale.
packaged with the Product. Include evidence of original purchase & a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd.
59
60