User's Manual

Hardware Setup

• Unpack and identify all GuestTags and GuestTag chargers. Place in designated locations

near or around register or primary distribution area.

• Ensure adequate power is available for the chargers. HMEW recommends that all

components be plugged into surge protection devices.

• Plug power supplies into chargers and place GuestTags on chargers.

• Utilizing the previously completed Pre-Installation Worksheet and floor map (copies provided

in packaging) determine where the PC or device(s) that will display the Vuze software will be

located, typically in the "expo" area. Ensure that there is adequate power available for the

device(s); giving consideration for the Reader.

• Unpack, identify, and separate each of the Reference Tags according to the tag "type".

Each tag will be labeled based on information provided during the sales process.

• There are three "types" for Reference Tags:

o Activate - located where the GuestTags are distributed to guests; i.e. Register,

Host Stand

o Zone or Table - labeled by name to indicate the location in the dining room; i.e.

Window, Table 14

o Deactivate - located where the GuestTags are collected after food has been

delivered; i.e. Expo

• Confirm that all equipment that is anticipated is accounted for. HMEW will provide in the

packaging recommended wood screws for mounting Reference Tags as well as plastic zip

ties if Patio tables were identified on the Site Survey or floor map. Commercial grade Velcro®

(not included) is recommended if mounting is not possible with provided screws or ties.

• Utilizing the floor map previously provided place the Reference Tags in their marked

locations.

 DO NOT mount the Reference Tags at this point. 

TOUCH SCREEN PC

• Vuze PC instructions assume the PC was purchased from HMEW as part of the Vuze system.

Details may vary if PC is sourced elsewhere.

• Each Vuze PC is Wifi capable, optional Remote PC Support is available, contact HMEW for

pricing.

• Prior to shipment, HMEW has fully staged, configured, and tested your Vuze PC with your

tags.

• Ensure proper power is available and place PC in pre-determined location.

• Once on, the PC will automatically load Vuze. A review of the interface is detailed later in

this document.