User's Manual

2. Connect with the earphone IE-1

(1) Plug the earphone into the jack of the receiver.

(Figure 1)

(2) Make sure the volume is at low level to avoid injury

to your ears.

(3) Insert earphones into your ear at a correct position.

(Figure2)

(4) Check if the silicon sleeve is suitable for your ear. If

not, replace with other sizes of sleeves for comfort

and best isolation. (Figure 3)

(5) Make sure correct channels are chosen. The letter

“R” and “L” on the earphones indicate the right and

left ear respectively.

5-3 Optional Accessory

1. DR-900/RP-900 Rack Mount Kit

Rack mount kit is available to install the half rack

transmitter into a standard EIA rack.

Figure 3

Figure 1

Figure 2