Installation Guide

Phoenix 1 Installation Guide
Juganu HQ
1 Yahadut Canada St., Or-Yehuda, Israel
Tel.: + 972-3-5310031
[e-mail]
WWW.JUGANU.COM
The Information provided herein is subject to change without prior notice by Juganu. Please
verify all details with Juganu. All values are typical values when measured under normal
laboratory conditions, and Juganu makes no warranties, expressed or implied, that such
performance will be obtained under end-use conditions.
JL-IG_Phoenix1 | Rev.03
5
Installation Procedure for a Horizontal Pole
1. Insert the AC cable through the mounting arm.
2. Attach the mounting arm to the light fixture in the required orientation (+/- 15°)
and tighten, using 4 M8 screws, a flat washer, and a helical washer.
3. Insert the AC wire protruding from the pole through the rear hole on the mounting adaptor.
Mounting arm
4 x M8
1
2
Mounting adaptor