Use & Care Manual

0

HOW TO USE JUICE EXTRACTOR
1. Follow the instructions on pages 8 and 9 to assemble the juice extractor.
2. Assemble the prepared fruits and/or vegetables to be used on the counter or in
a bowl next to the juice extractor.
3. Place a clean glass for your juice under the juice
spout (F).
4. Be sure the pulp container is in place.
5. Plug appliance into standard electrical outlet.
6. Turn the power to the Low setting and allow to run
10 seconds before placing any food into the feed
chute.
7. To use High, allow the appliance to run 10 seconds
on Low, then select High and place the food in the
feed chute.
Note: Use the RECOMMENDED SPEEDS guide to help determine your speed
setting.
8. Use the food pusher as a guide to gently direct the
produce through the feed chute. To get the most
juice from the fruits and vegetables, do not rush
the food through the appliance (G).
Note: When using the appliance, do not allow the pulp
container to overll. This may cause the appliance to
stall.
9. To empty the pulp container or the juice glass
during use, simply turn the appliance Off. Allow the
motor to come to a complete stop and for all juices
to nish dripping from the spout before emptying.
Be sure to replace pulp container and juice glass
before resuming extraction.
10. Unplug the appliance when not in use.
Important: Never place ngers or hands into the feed chute.
F
G
RECOMMENDED SPEEDS FOR JUICE EXTRACTION
FRUITS RECOMMENDED SPEED
Apricots Low
Blueberries Low
Blackberries Low
Cherries Low
Citrus Fruits Low
Grapes Low
Kiwi Low
Mangoes Low
Melons (skin removed) Low
Peaches Low
Plums Low
Raspberries Low
Strawberries Low
Apples High
Cranberries High
Melons (skin on) High
Pineapple (skin on) High
Papaya (skin on) High
VEGETABLES RECOMMENDED SPEED
Cucumber Low
Kale Low
Parsley Low
Spinach Low
Tomatoes Low
Asparagus High
Beets High
Broccoli High
Cabbage High
Carrots High
Celery High
Fennel High
Ginger High
Potatoes High
Sweet Potatoes High