Users Manual

87
❾
It will be easier to sew buttonholes on the thin fabrics
and/or near the overlapped sections, if the clamping
plate is used.
󱢳
1. Attach the buttonhole presser foot
to the presser foot holder, with the
clamping plate
󱢳
together.
2. Place the fabric between the presser
foot and the clamping plate.
* You can remove the clamping plate by holding
B
.
●
Buttonhole clamping plate
❽
6
Unplug the sensor pin
❹
after sewing.
7
Opening the buttonhole using a ripper
❼
.
[Double bartack]
Pierce a stopper pin
❽
at the bartack and open the
buttonhole with a ripper
❼
. Be careful not to cut the
stitches.
[Keyhole buttonhole]
Place a cardboard under the buttonhole and make a
hole with the eyelet punch
❾
. Then pierce a stopper
pin at the bartack and open the buttonhole with a rip-
per.
❼
B
❹
Leave the machine in Lock mode