Users Manual

95
6
Use both hands to hold the fabrics and
move it without letting it loose.
The target stitch length is about 1.5 to
2.0 mm.
7
When you have completed sewing of free-
motion quilting, press the feed dog UP /
DOWN / LOCK MODE button to lower the
feed dog.
The feed dog will be up and engaged at the same time
as the machine starts to sew.
●
How to lock stitches
・
At sewing start, pull up the bobbin thread on the top layer of the fabric, hold both needle and bobbin threads
together and sew 3 stitches on the same point. After that move fabrics as you wish.
In this way, stitches on the wrong side of the fabrics look neat.
・
At sewing-end sew 3 stitches on the same point and stop.
●
How to sew stitches with the same stitch length
・
When the foot controller is used, the fabrics can be guided by both hands and you can move the fabrics
freely.
・
Set the speed controller to medium or medium low  rst, press the foot controller completely and move the
fabrics.
→ if stitches become too large, set the speed controller to “faster”
→ if stitches become too small, set the speed controller to “slower”.
Tips
* The quilt ruler is also applicable.