Users Manual
100
Leave the machine in
Lock mode
6.22. Attaching a quilt sleeve
No. Pattern Presser foot
044
Edge Sewing presser foot (R)
1
Prepare a material for quilt sleeve.
❶
Quilting width
❷
22cm
2
Fold both ends by 2 cm respectively.
Sew the folded edges with 2-step zigzag
stitches (zigzag width 0.7 cm, stitch length
0.1 cm).
* Perform blind stitching at a slow sewing speed in
order to prevent puckering.
❸
2cm
❹
Quilt sleeve (back)
3
Sew the quilt sleeve as illustrated in the
gure.
❺
1cm
❻
Quilt sleeve (top)
■
How to make a quilt sleeve
❹
❸
❸
4
Manually sew basting stitches on the loop
side of the folded edge.
❺
1cm
❻
Quilt sleeve (top)
❻
❺
❻
❺
This stitch type is narrow blind stitch for attaching a sleeve
(material to be sewn on the back of quilted tapestry for pass-
ing a rod) to the quilt.
The narrow blind stitches are not likely to be visible from the
top surface of the quilted fabric.
❶
❷