Users Manual

118
8. Message catalog
* The message is erased by carrying out the relevant operation indicated by the message or pressing the button on
the screen.
When the sewing machine
starts up, or when the
needle moves.
The needle is moved by
pressing [OK].
Then, the initial screen is
displayed.
When one of the buttonhole
stitches is selected
and the buttonhole sensor
pin is not connected,
the machine starts to sew.
When a stitch pattern other
than buttonholes is selected
but the buttonhole sensor
pin is connected,
the machine starts to sew.
This pictograph is displayed
when the safety device
is activated while the press-
er foot goes up.
This pictograph is displayed
when “JUKI Smart
Feed” detection sensor
detects while the pattern
which cannot be sewn with
“JUKI Smart Feed”.
When the bobbin thread
amount has reduced.
When you have tried to
start the sewing machine by
pressing the start/stop but-
ton while the foot controller
is connected to the sewing
machine.
When changing from the
stitch type from the 1-nee-
dle straight stitch to the
standard stitch.