Operation Manual

107
Introduction of optional accessory parts
Make your home sewing more pleasant!
Please purchase the following items in the shop where you buy our products.
With this presser foot it is possible to attach
pearls, beads and thick cord.
Rolled hemming presser foot
Fabric edge is hemmed while rolling it under.
Used for bottom of shirts, blouses, frills and the
edge of handkerchiefs.
Button attaching presser foot
Quilt presser foot (Transparent
zigzag type)
This presser foot is used to attach buttons on
garments.
Cording and Embroidery
presser foot
Pearl attaching presser foot
Presser foot with guide
It is used for free-motion quilting. Zigzag stitch is
also possible with this presser foot.
It is used in free motion quilting and a cord can
be sewn together with this presser foot.
As the presser foot has markings, which show
2 mm distance, these marking will serve as a
guide.
DX7 DX5
DX7 DX5
DX7 DX5
DX7 DX5
DX7 DX5
DX7 DX5
Binder presser foot
Hemming presser foot for
zigzag
Quilt presser foot (open type)
It is possible to attach tapes such as bias tape
into four folds.
It is used in free motion sewing. As the front
portion is open, it is easy to see the needle entry
point.
Fabric edge is hemmed by zigzag while rolling
it under. Used for bottom of shirts, blouses, frills
and the edge of handkerchiefs.
Cording presser foot
It is possible to attach 1 - 3 cords by three-point
zigzag or decorative stitch.
Appliqué presser foot
Invisible zipper foot
As a seam does not appear on the right side of
the fabric, an opening can be nished with fabric
edges neatly butted.
Since the front and back of the presser foot is
short, it is easy to move the materials at curve
points. Also fabrics can be seen easily because
it is transparent.
DX7 DX5
DX7 DX5
DX7 DX5
DX7 DX5
DX7 DX5
DX7 DX5