Operation Manual

45
This stitch is used to prevent the cut edge of fabric
from fraying.
Keep some seam allowance and cut the sewn fabric
carefully so that stitches are not cut by the scissors.
Overcasting by 3-point zigzag
Pattern No. Practical 05
Presser foot
Standard presser
foot (A)
This overcasting stitch is used for overcasting light-
weight materials.
Guide the fabric along the guide and sew.
* Before sewing, make sure to check that the needle
will not hit the presser foot.
Overcasting stitch 3
Pattern No. Practical 08
Presser foot
Overcasting presser
foot (C)
* Do not use overcasting presser foot (C).
Attention
Turn OFF the power switch
before replacing the presser
foot.
Attention
Turn OFF the power switch
before replacing the presser
foot.