Operation Manual

48
Turn the zigzag width
adjusting dial to the
right side.
2. If the stitches fail to reach the folded edge
1. If the stitches reach too far beyond the folded edge
When changing the needle entry point
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.
DX7
DX5
Push the zigzag width
adjusting button "+".
Turn the zigzag width
adjusting dial to the
left side.
Push the zigzag width
adjusting button "-".
DX7
DX5