Operation Manual

72
1
Put top layer of fabric with patchwork and/
or appliqué, quilting cotton and bottom
fabric together by using pin or basting
stitches.
2
Assemble the quilt presser foot.
Raise the presser bar. Loosen the setscrew for press-
er foot holder and remove the presser foot holder.
(Refer to page 16)
Set the quilting foot and tighten the setscrew for press-
er foot.
Quilting (free motion)
Pattern No.
Quilting
1
Presser foot Quilt presser foot (Q)
3
Move the drop feed knob to the right hand
side.
Feed dog is now down.
Setscrew for
presser foot holder
Setscrew for presser
foot holder
Presser bar
Presser foot
holder
Attention
Turn OFF the power switch
before replacing the presser
foot.
It is called free motion quilting when moving the fabrics freely towards any
directions without using the feed dog of sewing machine.
When the feed dog is lowered (drop feed condition), it is possible to sew
various curves and/or any directions by moving the fabrics by hands.
* Be sure to sew straight stitch
pattern (center stitch base).
When doing the free motion
with zigzag stitch, use the
quilt presser foot (Transparent
zigzag type) which is optional-
ly available from your dealer.