RFID MODULE INSTRUCTION MANUAL Rev 2.
1. SPECIFICA S ATIONS Prod duct Information Other Accessories A Product Name Brand Name Model Name oltages Extreme Low(V) Operating Vo Operating Extreme Low( ℃) Temperature MHz) Frequency (M Max. Power (dBm) Modulation Tyype Antenna Inforrmation Accessories name A M Manufacturer M Model 2. APPEARAN A NCE RFID D MODULE IC TA AG DC4V V -25 IC TAG JUKI PSRFIDTA AG RFID MO ODULE JUKI PSRFID DUNIT Normal(V) DC5V Extrem me High(V) Normal( ℃) Extrem me High( ℃) 25 13.
. SIZE S ・RF FID MODUL LE ・IC TAG 37mm 4. LABEL L LO OCATION 45mm 18 m 5. SETUP S 5-1.R RFIDModule assembly ① ② 1)) Spacer② on the back of RFID mod dule①.
③ 2 2)Attachthe mountting plate③ with screws④. s ④ 5-2.P Preparing foor installatiion 1)Remove the scre ews⑤ and removee the cover⑥. ⑥ ⑤ 2)Remove the screw ws⑦ and remove th he oil tank⑧. ⑦ ⑧ 5-3.
1) Attach the RFID moodule① with h screws⑨ inside tthe table. 2) emoved parts. Reinstall the re ⑨ ① Cable conneection 5-4.C ⑩ 1)Connect RFIID modulecable to control box⑩ con nnector.
. How H to usee 6-1.S Sewing patttern writing g 1) Place the IC tag11 t on the black dot. 11 2) Press the Men nu button12 on thee HOME screen of the control panel. 12 13 3) Press the File eManagement buttton13. 14 4) Select the sew wing pattern14. 5) Press the RFIID button15. 6) Sewing patterrn is written on IC C tag. 15 6-2.
1) Prepare IC C tags11 with sewiing patterns writteen. 2) Paste IC ta ags11 onto cassettes16. 11 16 6 17 1) Press the e Lock File button1 17. 1) Mov ve the IC tag11 above a the black dot. 2) The sewing pattern n written on the IC tag is au utomatically rea ad. 11 FCC Sta atement T This device complie es with part 15 of the FCC Rules.
FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
