Operation Instruction

11
Key functions in the manual frame movement interface are described as follows:
, , : “Frame movement speed switching” key,Click to switch among low,
medium and high speeds. Correspond to patterning speeds 1, 2 and 3 in “user parameters”.
: 8 direction keys,Move in X and Y directions.
“Z+”, “Z-”, “shaft 1+”, ... “shaft 3-”: Rotate corresponding shafts manually; some of the shafts
have no effect on certain machines.
:The default is
“
No
”
, indicating that the manual frame-shift operation cannot be performed
before resetting. You can select
“
Yes
”
to perform a temporary manual frame-shift operation
before
reset. If it has been reset, this function is invalid.
: The current X and Y coordinates are set to the stop coordinates of X and Y axes after
resetting.
: Enter the head offset interface for setting the offset position of heads 2 and 3 in relation
to head 1. Head 1 is a sewing head. Desired functions such as laser cutting head and brush head can
be assigned to heads 2 and 3.
Display of the angular
p
osition of s
p
indle
Direction key: The
frame can be moved
in 8 directions
X/Y/Z coordinates
display
Shafts 1, 2 and 3
coordinates display
Key depression
speed switchover; 3
s
p
eeds are available