Operation Instruction

45
Chapter V Parameter File
Parameters may vary depending on usage scenarios. The parameter file management interface is
used to import and export parameter files, manage multiple parameter files, and select one of the
parameters in memory as the parameter actually used in the system.
Press key in the main menu interface to enter the memory parameter file interface
as shown in the figure:
The interface displays parameters files stored in the system. Click on the file name to make it
red, and then click , when a prompt message pops up reading "In progress, please wait..." and
then reading "Operation succeeded"; then, the system returns to the main interface, which means the
selected parameters have taken effect. All the set values and other hidden parameters in "User
parameters" and "Mechanical parameters" will be modified by this parameter file.
The key functions are described as follows:
: Write the selected parameter file into control board as a parameter actually used. The parameter
file imported to the system from USB flash disk can't take effect unless "Write" is clicked on.
: Delete one or more selected parameter files.
: Export all the parameters used by the current system to USB flash disk. Click "Export" to enter
the new file name, when the specified file name will be generated in USB flash disk with extension .xhp.
: Return to the menu page.