Operation Instruction

: Return to the main page.

:Copy one or more files from the memory into the root directory of USB flash disk. If a file

exists with the same name in the USB flash disk, a message will appear reading “The file already

exists,overwrite ?” Make the choice at the end.

: Click to enter the “parameter file in USB flash disk” interface. The system will list the files

and folders with extension .xhp, and support multi-level folder operations.

Select the name of the parameter file to be imported into the machine in the USB flash disk

parameter file interface, and click to copy the file to the memory space. Select the file in the

way as mentioned above, and click to make the parameter take effect.

Note: The parameter file varies depending on equipment model. Mixing is prohibited. Even the

equipment of the same model may have different optimal factory parameter configurations due to slight

differences in their mechanical structures. Hence, it is recommended, after the purchase of machines,

to export factory parameters for each machine and save them with different file names for future use.

The detailed steps for exporting parameters:

a) Insert USB flash disk;

b) Enter the "Parameter file" interface, and click "Export";

c) In the pop-up dialog box, enter numbers or letters as the file name of exported parameter, and

click OK to save it to the USB flash disk.