Operation Instruction

50
Automatic press for starting
work
Yes/No Yes
Manual move axis front
press
Yes/No No
Repeat the needle number Close/1/2/3 Close
"1"/"2" means that when the
stitching is started, the first
needle position is sewn for 1/2
additional times before the
sewing of next needle position.
"Close" means the sewing is not
repeated.
Threads for loosening 0~255 0
With the dynamic pressure
foot sewing drop height
0.000-4.000 0.000
With the dynamic pressure
foot sewing end drop height
0.000-4.000 0.000
Motor presser foot by half
Normal/Halve
/Enlarge
Normal
Auto
Process
Trim motor reset after work Yes/No Yes
Follow foot reset after work Yes/No Yes
Set the base forward moving Yes/No Yes
Set the base frame error Yes/No Yes
End of work output IO1
Nil/ OUT1—
OUT12;Low/
High
OUT1;Low
End of work output IO2
Nil/ OUT1—
OUT12;Low/
High
OUT1;Low
Stitch Speed of the first stitches 100-3000 300 (Adjusted as needed)