Operation Instruction

53
they are pressed down
Pedal operating sequence
Normal/Speci
al
Normal
Pedal operating mode
1STA/1STB/1
STC/2ST/3ST
2ST
There are different operation
modes for pedal switches of
different mechanical structures
(with or without self-locking,
etc.).
Sewing clip line start angle 1-990 1
Sewing clip line end angle 1-990 1
Trim clip line start angle 1-990 1
Trim clip line end angle 1-990 1
Winding
Setting
Winder machine status
Allow/Prohibi
t
Allow
Set the default state
of processing assist interface
Winding speed 100-4500 1200
Set the default rotation speed for
winding in the processing assist
interface
Winding timer (s) 1-63000 70
Set the time from start to
automatic stop of winding in
processing assist interface
Speed
Radio
High speed radio (%) 1-100 100
Actual speed of spindle in main
interface = Set speed * High
speed override
Med-high speed radio (%) 1-100 90
Med-low speed radio (%) 1-100 70
Low speed radio (%) 1-100 60
Reset
Setting
Reset when the clamp down Yes/No Yes
Manual reset after lifting Yes/No Yes