Operation Instruction

54
clamp
Return origin mode
XY /X
priority/Y
priority
XY
"XY " means to return to the
origin simultaneously; : "X
priority" means X axis returns to
the origin first, and then Y axis
returns thereto.
Back to the origin of
speed(mm/min)
100-20000
100
X and Y axes speed when
returning to the origin
XY axis cushion during reset
X Axis/XY
Axis/Y
Axis/No
X Axis
Extension axis reset speed
(mm/s)
1.000-
2000.000
1.000
Press reset alarm prompt Yes/No Yes
Output IO before reset
OUT1--
OUT10/Nil
Nil Output IO
Low/High Low
Level
Output IO after reset
OUT1--
OUT10/Nil
Nil Output IO
Low/High Low Level
Pause
Setting
Trimming threads in pause Yes/No Yes
"Yes": Automatic thread
trimming. "No": No automatic
thread trimming
Stitches position in pause
Down
position/Up
position
Up position
Uplifting the plate in pause Yes/No Yes
Pause switch type Self Self lock "Self lock" means the switch