Operation Instruction

56
statistics feature is enabled.
Bobbin counting mode
IN1—IN7/
Default
Default
Non-default bottom line
detection device can select an
input IO as the detection trigger
signal.
Bottom line margin
adjustment(mm)
0--600000 0
For special bottom line detection
device, the error residual length
of the bottom line residual
length is set.
Grab line
Trim catching position 0.0-200.0 0.0
Sewing start catching
position
0.0-200.0 0.0
Laser output IO
OUT1-
OUT12/Nil
Nil
Used to specify the output IO
state for a laser line segment.
Coord position 1--4
0.000—
6000.000
0.000
Used for "self-programming"
functional mode, coordinate
position of relevant axis-shifting
instructions, dynamic
modification and invocation.
Attach param 1--4 0--100000 0
For the "self-programming"
functional mode, some
instructions need to be set and
invoked dynamically.
Break
Line
Detection
Automatic break detection Yes/No Yes
"Yes" means to stop the
operation and give a prompt
when thread break is detected
Cutting for the break line Yes/No Yes
"Yes" means the thread is
automatically cut upon detection
of break
Ignore the pin number when 1-255 3 No break detection is performed