Operation Instruction

57
sewing for the initial set stitch number
Check threads of the broken
in effect
1-255 2
Thread break is confirmed by
continuous detection of break at
the set stitch number
Delay when broken threads
(s)
0.01-255.00 0.20
Set the delay time and take
actions against break after
confirming thread break
Broken line output IO
OUT1-
OUT12/Nil
Nil
After the disconnection occurs,
the corresponding output IO
maintains a high level output for
1 second.
QEP2 as bobbin thread
detection
Yes/No No
Some machines employ B
encoder for bottom thread
detection
Trim
Setting
Speed of the spindle
trimming (rpm)
10-500 10
Starting delay of trimming
(s)
0.01-6.55 0.1
Duration of drawing threads
(s)
0.01-6.55 0.1
Dial line of delay presser
foot (s)
0.01-6.55 0.1
Delay for loosening
threads(s)
0.01-6.55 0.01
Whether to trim threads after
moving empty
Yes/No Yes
Whether to use the pull
thread
Yes/No Yes
"No" means the wiper is turned
off
Trim Motor trim thread mode Back and Back and forth