Operation Instruction

61
Chapter VII Machine Param
Mechanical parameters can meet the more complex requirements of users. Users can set
mechanical motion attributes according to their own needs, but the premise is that it must be operated
by mechanical assemblers.
Machine Param Interface
Press key in main menu interface to enter the machine param interface as shown in
the figure:
Description of parameter classification:
Shaft Angle Setting: The setting of angle values of feeding, thread cutting and machine needle.
Input Port Setting: Enter IO polarity settings.
Out Port Setting: Setting of duty cycle and duration of output IO.
Platen Size Setting: Size of working breadth and setting of datum-free.
Axis Run Param: Setting of direction and polarity of spindle, XY axis, foot press, etc.
Delay Setting: Settings of delay or time for foot pressing, plate pressing and shutdown.
Foot Follow Setting: Set the working angle and height of the servo foot.
Inflection speed: Set the working speed at inflection point.
Swing Setting: The setting of the stroke of the swing needle rod and the extended shaft.
Axis Resolution: Set the resolution of the XYZ axis.