Operation Instruction

62
Button Polarity: XYZ axis key polarity, graphics mirror and spindle oil supply settings.
Motor clip: Set up double motor clamping wire.
Non-standard: Non-standard special purpose related settings.
Rotate Setting: Settings of machine head rotation type.
Taking the setting of shaft angle and pressing plate size as examples, the interface is as follows:
: Spindle inversion key, the key spindle began to invert slowly.
: Spindle forward key, the key spindle began to rotate slowly.
: Manual foot-pressing lifting key, every time a foot-pressing switch between lifting and
pressing.
: According to the angle value of the current machine updown needle positioning, other angle
values can be calculated automatically according to the proportion of the conventional setting values.
: Needle bar up and down keys, each button once the needle bar up positioning (the highest
point of the machine needle) and down positioning (the lowest point of the machine needle) switching.
: Manual line cutting operation.