Operation Instruction

66
Foot polarity
Positive/
Negative
Positiv
e
Foot Dir polarity
Positive/
Negative
Positiv
e
M
200-500 200
N
X-Axis rigid
-6---6 0
Y-Axis rigid
Delay
Setting
Automatic processing
delay
（
ms
）
0-5000 0
Foot down lifting
delay
（
ms
）
Foot uplifting delay
（
ms
）
Plate operating delay
（
ms
）
Electromagnet foot
dormancy time(s)
（
s
）
0--300 0
When the solenoid foot is idle, it will
automatically enter the dormant state
after exceeding the set time
(corresponding to the low level of IO
output) and turn off this function when
the value is 0.
Timeout stop
time(ms)
0--
1800000
0
After the last work, if the work does not
continue beyond the set time, the alarm
will be prompted. Turn off this function
when the value is 0.
Work enable input IO 0--7 0
If the input IO is set at high level, it can
work normally. Otherwise, it can not
start or stop working. Turn this off when
the value is 0.