Operation Instruction

73
Chinese, Traditional Chinese, and English to be chosen from.
System Upgrade: Used to upgrade the firmware version of motherboard and display screen.
Drive Preview: Preview current, subdivision and other parameters of drive for each shaft.
(Modification is not available on screen)
Test Transfer: Used to test whether the communication between display screen and motherboard,
and to view logs, etc.
Input Test
Used to test if the external input circuit is in good condition.
Press key in the assist operation interface to enter the input test interface as shown
in the figure:
You can manually trigger relevant sensors and check whether the input status has changed, and
determine if the sensor or hardware is in good condition.
Output Test
Used to test whether output control is in good condition.
Press key in assist operation interface to get into output test interface as shown in
the figure: