Operation Instruction

5
Chapter II Description of Main Interface
System Power-up
Upon system power-up, the HMI displays the boot screen, when the spindle will automatically
rotate for testing and reset other parts. The reset action is related to power-up reset parameters setup.
Main Interface of Processing
Display Instruction for Main Interface of Processing
The main interface of processing is automatically activated after the display of boot logo. The
main interface of processing is shown below:
Fig. 2-1 Main interface of processing
Key functions in the main interface of processing are described as follows:
Processing file preview area: Show the currently selected file graph; click to switch between “full
graph” (scale for optimal display) and “at ratio” (actual ratio to the processing range). When the
processing graph is greater than 8,000 stitches, only “full graph” display mode is available.
List of memory files: Show the list of memory files; click to choose different processing files.
:lock file" key: Lock the currently processed file to prevent misoperation. Once a file is
Prompt message area
Current
processing file
name and the
length & width
Lock file icon
Whether current time
is in sync with the
networ
k
Working speed o
f
s
p
indle
List of memory files
Length of bottom
thread use
d
Processing file
p
review area
Processed quantity
Total stitch count of
p
rocessing file and the
current processing
stitch count
Indicator lamp
USB flash dis
k
Touch key