Operation Instruction

locked up, other processing files can't be chosen, when icon will appear in the preview area.

Click once to lock, and click again to unlock.

Note: Automatic template recognition will work only in the locked state of "lock file". The

recognized template is displayed in the "prompt message area", and the corresponding numbered file

will be automatically selected. If the "template recognition mode" is set to "by file name", electronic

tag (identifier) will be used to match the file name; if it is set to "by serial number of file", the serial

number of file will be matched using a code scanner.

: The needle-threading function. After entering the threading state, the pressing foot is

automatically lowered and the starting operation is automatically locked to prevent accidental

start-up.

: "Acceleration" key. The rotating speed of spindle increases by 100 rpm. If this key is

pressed and held (long-pressed), the speed will increase continuously until the set max speed is

reached. Arbitrary change to rotating speed can be prohibited by setting a password.

: "Deceleration" key. The rotating speed of spindle decreases by 100 rpm. If this key is

pressed and held, the rotating speed will decrease continuously until the set min. speed is reached.

Arbitrary change to rotating speed can be prohibited by setting a password.

: Display the current spindle speed. Click to pop up the “File Speed” setting interface to

set the independent speed of the current file. If set to 0, it means no independent processing speed.

: "Bottom thread statistics" key. Show the used length of bottom thread. Press the key to

enter the processing statistics interface.

: "Processing statistics" key. Show the finished quantity. Press the key to enter the

processing statistics interface.

: "Main menu" key, Press the key to get into main menu interface.

: "Try" key, It is used to simulate the processing process based on graphical trajectory.

When this key is depressed, XY axes rotate while the spindle is stationary.

: "Segment fast reverse" key, Manually move back without load to the starting point of