Owner manual

Caution:

The temperature controlling i.e. of fluids in a reactor constitutes normal circulator

practice.

We do not know which substances are contained within these vessels.

Many substances are:

 inflammable, easily ignited or explosive

 hazardous to health

 environmentally unsafe

i.e.: dangerous

The user alone is responsible for the handling of these substances!

The following questions shall help to recognize possible dangers and to reduce the

risks to a minimum.

 Are all tubes and electrical cables connected and installed?

Note:

sharp edges, hot surfaces in operation, moving machine parts, etc.

 Do dangerous steams or gases arise when heating?

Is an exhaust needed when working?

 What to do when a dangerous substance was spilled on or in the unit?

Before starting to work, obtain information concerning the substance and

determine the method of decontamination.



Notice: Check the safety installations at least twice a year!

 Excess temperature protection according to IEC 61010-2-010.

With a screwdriver turn back the adjustable excess temperature protection until the

shut-down point (actual temperature).

 Low level protection according to IEC 61010-2-010.

To check the function of the float, it can be manually lowered with a screwdriver for

example.