Owner manual



Editing

PrgNr: Set the program you wish to create. 0 ... 5

SP : Setpoint

TI : Time [hh:mm] or

GRD: Gradient [°/t] = [°/min]

Change type of program in MENU >configuration<,

menu item >Programmtyp/program type< .

ST: Step 0 … 59

 Press the key if a parameter is to be retained. (prior to OK)

Level 2



Example:

Program (PrgNr.) 2 is to have a target temperature with a set

point (SW) of 100.00 °C in section t (ABS) 3.

Duration (ZI) 1 hour.

Select the program number.

 Set the desired >PrgNr.< by pressing

and .

Level 3

 For the selected section >ST< a setpoint >SP< and the

duration >TI< or the gradient >GRD< are entered in the

right half of the input window.

Input window for >ST<, >SP< and >TI< / >GRD<

1. Set the desired Step >ST < by pressing

and .

2. Set set point >SP< by using the numeric keypad and

confirm by pressing

3. Set the time >TI< or a gradient >GRD< using the numeric

keypad and confirm by pressing

 By confirming time or GRD the values on the left side of

the input window are moved.

 The values for the next section are entered in the right half

of the input window.

See above 1. / 2. / 3.