Manual

Setting of temperatures

7. Setting of temperatures

Press the

key to call up the menu for temperature selection.

3 different working temperatures can be adjusted. Their values are freely

selectable within the operating temperature range.

 The temperatures can be set in start or stop mode.

Setting of working temperature in the

Factory settings:

1. Press the key

. The value flashes

2. Select SETPOINT 1 or 2 or 3 using the key

or .

3. Confirm by pressing the

key.

 The circulator uses the new working temperature value for

temperature control.

Example:

Adjustment/modification of the pre-setting of "SETPOINT 3"

 If the active Setpoint is changed, the new value is immediately used

for the control of the working temperature.

The heater control indicator flashes.

Setpoint3: Change the value from 70.00°C to 80.00°C.

See standard display line 1

 Use the numeric keypad to enter

and .

Then press enter

to store the value.

Notice: Refer to SETPOINT MAX / MIN in chapter „LIMITS“

8. Safety installations, warning functions

Check the safety installations at least twice a year! Refer to page 13.

Settings for the excess temperature protection > SafeTemp< and for the

warning functions > OverTemp< and > SubTemp< are made in a menu

which is called up by pressing the key

Menu item > Type< allows choosing between a warning and an

alarm cut-off for the menu items > OverTemp< and > SubTemp<.