Manual

SL
63

 The parameter flashes. Set by using the
numeric keypad and confirm by pressing
.

 The parameter flashes. Set by using the
numeric keypad and confirm by pressing
.

 The parameter flashes. Set by using the
numeric keypad and confirm by pressing
.

 The parameter flashes. Set by using the
numeric keypad and confirm by pressing
.
9.8.1. Limits for internal control and external control
Set Max / Min– Maximum and minimum setpoint
Restriction of the adjustable temperature range.
The limitation of the operating temperature range effects the temperature
setting in the menu with the key
.
Only setting of working temperatures which lie within the determined limits
is possible
Existing settings for Setpoint 1, -2, -3, as well as those for >OverTemp<
and > SubTemp <, are automatically deferred into the limit range.
Setting range:
-94,90 °C ... +300,0 °C
Set maximum heating / cooling
The heating and cooling capacity of the unit are adjustable. 100 %
corresponds to the technical specification of the equipment.
Setting range:
Heating Max – 0 to 100 % in 1 % steps
Cooling Max – 0 to 100 % in 1 % steps