User Manual

5 Operation
22
5.5 Operation of the fixed-setpoint controller
Altering the
setpoint
In normal display:
h Alter the present setpoint with
I and D
(the value is accepted automatically)
Manual mode In manual mode, the controller output can be altered by hand.
h Change to manual mode with
X (press for more than 2 seconds)
The output appears in the lower display. The hand symbol and the unit “%” light up in
addition.
h Alter the output with
I and D
In the case of a modulating controller, the actuator is opened or closed using the keys.
The various levels can be accessed from the manual mode.
h Return to the normal display with
X (press for more than 2 seconds)
The output entry on a changeover is configurable. The manual mode can be inhibited.
v Chapter 8.2 “Controller “Cntr””
Additional operating options for the fixed-setpoint controller can be implemented via
the binary functions.
v Chapter 8.6 “Binary functions “binF””
Normal display
Manual mode