User Manual

5 Operation
24
5.6.1 Entering programs
Function A setpoint profile can be implemented with a maximum of 8 program segments.
Entry on the
instrument
The instrument must be configured as a program controller/generator.
v Chapter 8.3 “Generator “Pro”” (Function)
Configurable time base: mm:ss, hh:mm und dd:hh (s=seconds, m=minutes, h=hours,
d=days).
v Chapter 8.3 “Generator “Pro”” (unit)
The segment setpoints (SPP1 — SPP8) and segment times (tP1 — tP8) are set at the
operator level (program data).