User Manual

31
8 Configuration
General The following applies to the representation of parameters and functions at the
configuration level:
The parameter is not displayed or can not be selected if
- the equipment level does not permit the function assigned to the parameter.
Example: Analog output 2 can not be configured if
analog output 2 is not implemented in the instrument.
Access
H
Some parameters can only be programmed through the setup program. These
are marked in the symbol column with “(setup)”.
The symbol (appears in the display) that corresponds to the menu item is
shown in the chapter headings (e.g. 8.1 Analog inputs “InP”).
H
Levels can be inhibited.
v Chapter 5.3 “Level inhibit”