User Manual

35
8 Configuration
Customized fine
tuning
A signal is processed electronically (conversion, linearization …) to produce a
measured value via the analog inputs of the controller. This measured value enters into
the calculations of the controller and can be visualized in the displays (measured value
= displayed value).
This fixed relationship can be modified if required, i.e. the position and the slope of the
measurement characteristic can be altered.
Analog inputs (general)In12 ➔
Symbol Value/selection Description
Temperature unit
Unit
0
1
deg. Celsius
deg. Fahrenheit
Unit for temperature values
Sampling cycle time
CycL
0
1
2
3
50msec
90msec
150msec
250msec
Supply frequency (setup) 50Hz
60Hz
Adaptation of the conversion time of the input circuitry to the
supply frequency
Factory settings are shown bold.